Retaining Nut
Aluminum retaining nuts are available to hold the Series 141, 160, 160A and 442 mixing nozzles onto adapters, manifolds, and valves. These retaining nuts are used when a metal jacket is not required.

One Piece Jacket
For medium- and high-pressure systems, we recommend that a metal jacket be used over the mixing nozzle. TAH offers a range of low-cost, one-piece jackets. They are ideal for robotic applications where repeat positioning is required. All TAH manifolds and valves have our standard 7/8 x 14 thread, but our metal jackets are offered in both standard and an alternative 7/8 x 9 thread for your convenience.

Luer Lok Adapter
Luer Lok Adapters (locking hubs) are used for attaching needles to mixers (see blue nut in photo). When ordering, simply add the suffix “LL” to the mixer part number (e.g. 160-818LL). To attach syringes to mixers, order female-to-male Luer Lok Adapters by adding “LL-FH” to the mixer part number (e.g. 160-818LL-FH). If you want to use a metal jacket with the 160-4XX and 160-6XX mixers, order the mixer and the Luer Lok fitting as two separate items unassembled. Consult our Technical Service or Sales Department for details.

Luer Needles
TAH offers two types of Luer Needles—standard and tapered. The standard needle features stainless steel tubing with a burr-free blunt end and plastic hub. The tapered needle is a one-piece, plastic molded part. The needles are color-coded and pre-packaged with 50 needles per bag.

Support Washers
With high-pressure drops greater than 250 psi (17 bar), a washer will support the mixer and prevent crushing. Inquire with our Tech Services or Sales Departments for ordering.

Bell Inlet
TAH offers plastic inlet sleeves which press fit into the standard Series 160 Bell Mixer. These sleeves are used to convert our mixers to match competitor mixing nozzles which have a smaller inlet bell. Order Part. No. 160-SLV.